![]() ![]() hook ups to suit non standard sizes or configurations may not be available or attract addition cost. Now you can hose the machine to suit.Īttachment sizes, dimensions and technical information can be found in the photos. The thin bar between each bracket can now be removed.Īfter this has cooled and you have repainted your dipper stick, reinstall your thumb double check full motion has no problems. Once everything is finalized and double checked to be straight, you need to remove the thumb and cylinder to fully weld the top bracket and bottom bracket to the boom. You may need to cut the length of the thumb back depending on your machine. ![]() The Hydraulic thumb length is very long to suit a lot of applications. Once this is tack welded, Cycle the dipper stick all the way in and ensure there is clearance between the thumb and your boom. Once you have decided the height you need to weld the thumb on, you need to ensure its welded on straight to the dipper stick. You should test fit all attachments to ensure there is enough clearance. then cycle the bucket cylinder fully to ensure enough clearance. This can be easily cut shorter to suit your attachments.ĭuring installation, you will need to simply curl your bucket all the way in and place the hydraulic thumb kit on your dipper to test fit location. The Dig-it design features a long thumb length, allowing it to be used on larger attachments or with some tilt hitches. it also has a smaller range of rotation and cannot be positioned as well to suit a wide range of grabbing when compared to a hydraulic grab. A Excavator thumb is used to grab objects between it and the machines bucket.Ī hydraulic Mini Excavator thumb is very convenient due to being packed up on the dipper stick during digging, but can be extended at any time to pick an object up.Ī hydraulic thumb is however not a suitable replacement for a hydraulic grab, it does not allow bucket rotation as you are using the bucket to grab against. The Dig-it Excavator Hydraulic thumb kit is a heavy duty grab option which is welded onto the inside of your digger dipper stick. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |